Home / Products / Lubricating Oil Analysis Instrument

Product Category

Contact Us

Lubricating Oil Analysis Instrument Manufacturers&Suppliers

Friend supply Lubricating Oil Analysis Instrument etc. Lubricating Oil Analysis Instrument is used for Instruments for testing lubricating oils to test various aspects of the oil - from viscosity to flash point, ability to reduce friction, and different measurements of physical properties, purity, behavior and stability.

The Instrument is designed and manufactured according to Industry standard NB/SH/T 0059-2010 and ASTM D5800 Standard test method for evaporation loss of lubricating oils .It’s suitable to determine lubricating oil(especially internal combustion engine oil) and the evaporation loss of lubricating base oil at 250℃.

FDH-1402 Automatic Engine Detector (CCS)

Engine oil apparent viscosity tester applicable standard: GB / T6538 ASTM D5293 The instrument mainly tests the low temperature power viscosity index of engine oil, using contemporary advanced technology, set mechanical, optical electronics and computer technology in one, temperature measurement, constant temperature control. Temperature control is accurate and stable. The engine oil apparent viscosity tester is designed with reasonable structure, stable performance and simple operation.

More >>
FDH-1502 ASTM D3829 Automatic Engine Oil Borderline Pumping Temperature Tester

Fully automatic engine oil borderline pumping temperature measuring instrument Applicable standards: GB/T9171, ASTM D3829, fully automatic engine oil borderline pumping temperature measuring instrument adopts modern advanced technology, integrates mechanical, optical electronics and computer technology into one, for temperature measurement, Constant temperature control. Temperature control is precise and stable. The fully automatic engine oil boundary pumping temperature measuring instrument has reasonable structure, stable performance and simple operation, and is an ideal analytical testing equipment.

More >>
FDH-8461 Automatic High-temperature High-shear Viscosity Tester

The automatic high-temperature high-shear viscometer mainly measures the apparent viscosity of lubricating oil at high temperature and high shear rate. The test principle is to make the sample from the capillary under the pressure of nitrogen (carbon dioxide) under the test condition of 150 °C. The viscometer flows out, and the apparent shear rate of the capillary viscometer reaches a certain apparent viscosity from the outflow time and pressure of the sample, and the viscosity of the oil corresponding to the measured pressure is corrected by the curve of each viscometer.

More >>
FDH-9101 Lubricating Oil Adhesive Slip Characteristics Tester

Instrument meet the requirements of SH / T 0361 standard design and production, mainly used to assess the rail oil lubrication adhesive-sliding performance, the specific index is static-dynamic friction coefficient difference, the smaller the difference, the lubricant viscosity-sliding performance, the better, is used to evaluate the rail oil, the use of rail oil again later has a good guidance and evaluation effect.

More >>

Automatic Engine Testing Device Lubricating Oil Adhesive Slip Characteristics Test Automatic Engine Diagnostic Equipment Lubricating Oil Testing Equipment Suppliers Lubricating Oil Analysis Instrument Manufacturers Automatic Engine Detector CCS

COMPANY NEWS

2025-03-21

How Often Should a Calorific Value Analyzer Be Calibrated?

How Often Should a Calorific Value Analyzer Be Calibrated?Regular calibration is essential for maintaining accuracy. It is recommended to calibrate the instrument every 6-12 months or according to ISO and ASTM standards.

2025-03-14

How Accurate Are Calorific Value Analysis Instruments?

Calorific value analysis instruments are highly accurate and play a crucial role in determining the energy content of fuels such as coal, petroleum, biomass, and natural gas. Modern instruments can achieve an accuracy level of ±0.1%, making them reliable for industrial and laboratory applications.

2025-03-08

Why is Calorific Value Important for Coal and Petroleum?

Calorific value is a key factor in determining fuel efficiency, economic viability, and environmental impact. Coal and petroleum with higher CVs are preferred for power generation, industrial use, and transportation, as they provide more energy per unit, reducing costs and emissions.

We strive to create new management models and new products to meet the growing needs of customers.

QUICK LINKS

PRODUCTS

CONTACT US

Floor 4, Building 6, Zone A, Jindaoyuan Phase I Industrial Factory, No. 169 Huizhi Middle Road, Changsha High-tech Development Zone

+86-17871927557

friends2010@163.com