General and Power Oil Analysis Instrument

The instrument is designed and manufactured in accordance with the requirements of the ASTM D3828,GB/T 5208 "Determination of the flash point of the rapid balance closed cup method", which can meet the requirements of petroleum, chemical, paint, paint, railway, aviation, electric power, commodity inspection, troops and The scientific research unit's requirements for the rapid test of closed flash point of petroleum products.

The automatic open flash point tester is designed and manufactured according to ASTM D29, GB / T3536-2008 standard "Petroleum Product Flash point and ignition point Measurement Method (Cleveland Open cup method)". For oil products with open cup flash point higher than 79℃

Automatic viscosity measuring instrument used by GB / T265-88, GB / T11137-89, ISO3104, ASTMD445, ASTM D446 requirements, determination of liquid petroleum products (Newton liquids) kinematic viscosity, in units of m2 / s, usually Use mm2 / s in practice. Dynamic viscosity of the liquid at a constant temperature measured kinematic viscosity and density of the product at the same temperature of the liquid. Automatic Viscosity measurement of transparent and opaque liquids, including crude oil, light and heavy fuel oil, lubricating oil additives, oil kinematic viscosity.